Master Installation Electrician

The Master Installation Electrician is a person who has been registered as a Master Installation Electrician in terms of regulation 9 and who has been approved by the Chief Inspector for the verification and certification of the construction, testing and inspection of any electrical installation for efficient and effective custody, transfer and transport of petroleum products in liaison with Operations, Instrumentation and Mechanical departments in Transnet Pipelines.

The Master Installation Electrician is responsible for electrical scheduling, inspection and to ensure safe working conditions.Position Outputs1) Managing of COC’s (Certificate of compliance) a. Undertake periodic inspections and issuing COC’s as per National Codes and OSH Act b. Conduct 2Y compulsory OHSact Hazardous area equipment inspections. c. Maintain depot COC’s and compliance of Electrical Equipment housed in Hazardous areas.

  • Give guidance and oversee Electrical Installations 3) Control the integrity of Equipment
  • Ensure the correct application of the correct Electrical equipment in the Plant/operations
  • PREVENTATIVE MAINTENANCE
  • To perform preventative maintenance tasks on electrical equipment by detecting, repairing and reporting minor defects as well as reporting major defects thereby ensuring reliable equipment for the continuous operation of the pipeline e.g. 220V-3.3 Kv motors, control gear and trip protection equipment e.g Actuators
  • DEFECT REPAIR
  • Identify, analyse and repair defects on installed (live) equipment. Repair specific installed (live) equipment by performing diagnostic tests to identify defects and effect repairs. Reading and understanding schematics and reports are essential e.g. Mainline motor starter and trip protection, 380V panel starters and trip protection.
  • BONDING
  • Witness and install
  • REMOVE AND REPLACE INSTALLED (LIVE) EQUIPMENT
  • Removal and replacement of specific equipment by planning the complete installation, isolation and removal of the equipment as well as preparing and installing the replacement, energising and testing the operations of the equipment e.g. Main motors, Actuators, lights, cranes, enclosures, isolators and stop/start stations.
  • REFURBISHMENT AND MODIFICATION ELECTRICAL EQUIPMENT Refurbishing equipment by disassembling the equipment, replacing defective parts, reassembling and testing the equipment to the manufacturers specification e.g.
  • Starters
  • Actuators
  • Certify all refurbished Equipment
  • HIGH VOLTAGE EQUIPMENT Obtaining authorisation and undertaking switching (A-Brown) and earthing on high voltage switchgear and equipment up to 132KV, issuing of work and test permits as well as undertaking maintenance of the above equipment. Also supervise unathorised personnel in substations and HT yards Work to a clearance of live high voltage equipment as per electrical HIGH VOLTAGE instructions
  • SAFETY
  • Attend Meetings
  • Do Safety Inspections
  • Use of safety equipment
  • Ensure compliance of Equipment for flameproof safety and standards
  • Assist with Job Observations and Supervision of personnel
  • ADMIN The effective control of administration duties which includes:-
  • Reports (defect, inspection)
  • Obtain and cancel hot work permits (Electrical)
  • Job cards
  • Operate SAP Modules (MM & IM)
  • Maintain records, registers and COC’s as per applicable legislation
  • Assist with internal electrical audits.
  • Assist with Acting as an Electrical Supervisor as and when required.
Qualifications and ExperienceEssential Requirements Trade Test Electrical (3 years) with 3 years Technical/Electrical on the Job experience. Must have adequate knowledge of all electrical equipment on Transnet Pipelines to be able to function on his/her own. The following courses must be passed with practical on the job experience during the three years’ experience in Transnet Pipelines. Obtain qualification and accreditation to qualify for a Master Installation Electrician Register at the Department of Labour as a Master Installation Electrician and complete 2 years on the Job Training and exposure and obtain final Accreditation. Computer literate SAP Course in Plant Maintenance (MM & IM Modules). Purchasing and Inventory, Word Excel, etc. High Voltage safety instructions (A-Brown) Thereafter a person has to get practical experience (training) on depots in the region until passed out. He/she has to attend a refresher course every two years and get tested and recertified every two years. NOSA (Safety) course Fire Fighting Oil spill course First Aid Level 2 Rotork actuator course on A-Range, IQT and IQ-Range Electrical motor course Transformer (HT) course Working in confined spaces Crossings and Cathodic Protection course ( Basic course) Theory: Operations Course: Thereafter a pers
Back to blog

Other Jobs To Apply

No other job posts for this day.

Common Interview Questions And Answers

1. HOW DO YOU PLAN YOUR DAY?

This is what this question poses: When do you focus and start working seriously? What are the hours you work optimally? Are you a night owl? A morning bird? Remote teams can be made up of people working on different shifts and around the world, so you won't necessarily be stuck in the 9-5 schedule if it's not for you...

2. HOW DO YOU USE THE DIFFERENT COMMUNICATION TOOLS IN DIFFERENT SITUATIONS?

When you're working on a remote team, there's no way to chat in the hallway between meetings or catch up on the latest project during an office carpool. Therefore, virtual communication will be absolutely essential to get your work done...

3. WHAT IS "WORKING REMOTE" REALLY FOR YOU?

Many people want to work remotely because of the flexibility it allows. You can work anywhere and at any time of the day...

4. WHAT DO YOU NEED IN YOUR PHYSICAL WORKSPACE TO SUCCEED IN YOUR WORK?

With this question, companies are looking to see what equipment they may need to provide you with and to verify how aware you are of what remote working could mean for you physically and logistically...

5. HOW DO YOU PROCESS INFORMATION?

Several years ago, I was working in a team to plan a big event. My supervisor made us all work as a team before the big day. One of our activities has been to find out how each of us processes information...

6. HOW DO YOU MANAGE THE CALENDAR AND THE PROGRAM? WHICH APPLICATIONS / SYSTEM DO YOU USE?

Or you may receive even more specific questions, such as: What's on your calendar? Do you plan blocks of time to do certain types of work? Do you have an open calendar that everyone can see?...

7. HOW DO YOU ORGANIZE FILES, LINKS, AND TABS ON YOUR COMPUTER?

Just like your schedule, how you track files and other information is very important. After all, everything is digital!...

8. HOW TO PRIORITIZE WORK?

The day I watched Marie Forleo's film separating the important from the urgent, my life changed. Not all remote jobs start fast, but most of them are...

9. HOW DO YOU PREPARE FOR A MEETING AND PREPARE A MEETING? WHAT DO YOU SEE HAPPENING DURING THE MEETING?

Just as communication is essential when working remotely, so is organization. Because you won't have those opportunities in the elevator or a casual conversation in the lunchroom, you should take advantage of the little time you have in a video or phone conference...

10. HOW DO YOU USE TECHNOLOGY ON A DAILY BASIS, IN YOUR WORK AND FOR YOUR PLEASURE?

This is a great question because it shows your comfort level with technology, which is very important for a remote worker because you will be working with technology over time...